1. Manuals
  2. Brands
  3. Bulldog Security Manuals
  4. Security System
  5. 781
  6. Installation and owner's manual

Bulldog Security 781 Installation And Owner's Manual

Universal bypass module
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual

INSTALLATION GUIDE

UNIVERSAL BYPASS MODULE • MODEL 781
CONTENTS
Universal Bypass ...........................................
Before You Begin ...........................................
Passkey (VATS) Installation (GM only) ........................ 1
Passlock I Installation (GM only) ..........................
Passlock II Installation (GM only) ...........................
Testing for Resistor Values (GM only) ........................ 2
Checking Resistance Values ..................................
Making Connections..........................................
Setting Dip Switches (For GM Only)...........................
Troubleshooting ............................................
VATS Dipswitch Resistance Settings ...........................
Dipswitch Resistance Settings .............................
All tech personnel are expertly qualified to answer any technical questions.
Technicians are available Monday through Friday from 9:00 a.m. until 8:00 p.m. and Saturday 10:00 a.m. until 4:00 p.m.
OWNER'S GUIDE
Technical Assistance
Address
288 Canton Avenue • Wintersville, Ohio 43953
Telephone
Phone: 740-264-4710 • 800-878-8007 • Fax: 740-264-7306
•
1
1
1-2
2
2
3
3
4
4
4
5-8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 781 and is the answer not in the manual?

Questions and answers

Related Manuals for Bulldog Security 781

Summary of Contents for Bulldog Security 781

  • Page 1: Table Of Contents

    INSTALLATION GUIDE • OWNER’S GUIDE UNIVERSAL BYPASS MODULE • MODEL 781 CONTENTS Universal Bypass ........... Before You Begin ........... Passkey (VATS) Installation (GM only) ......1 Passlock I Installation (GM only) ......Passlock II Installation (GM only) ......Transponder Installation (all others) ....... Testing for Resistor Values (GM only) ......

  • Page 2: Universal Bypass

    UNIVERSAL BYPASS MODULE 781 The Bulldog Model 781 interface module is used when installing remote starters in any vehicle equipped with an anti-theft system. This model allows easy interfacing while maintaining the OEM system’s integrity. BEFORE YOU BEGIN It will be necessary to open the 781 Module to remove the wiring harness. Simply insert a straight shank screwdriver into the two wide slots in the bottom of the module to separate the halves.

  • Page 3: Passlock Ii Installation (Gm Only)

    12. The BLUE wire is not used. 13. Look up the value read from the meter on the chart and set the switches remembering a (1) on the chart indicates a switch in the “up” position and (0) being “down”. See page 4. 14.

  • Page 4: Checking Resistance Values

    CHECKING RESISTANCE VALUES FIGURE 4 • PASSKEY (VATS), PASSLOCK I and PASSLOCK II Transponder Loop Plug (NOT USED) with VATS, Passlock I or Passlock II Dip switches 8 Position Harness Connector (2) Resistor Measuring Pads NOTE: Used when checking dip switches. Measure resistance value with ohm meter. MAKING CONNECTIONS (Non-transponder) FIGURE 5 •...

  • Page 5: Setting Dip Switches (For Gm Only)

    SETTING DIP SWITCHES NOTE: Switches must be set before installation; CAUTION: Never set switches 1-10 all to (0) “down” when installed. Switches 1-10 control the resistor value as shown in the chart. A “1” in the chart indicates the switch is in the “up”...

  • Page 6: Dipswitch Resistance Settings

    DIP SWITCH SETTINGS RESISTANCE DIPSWITCH SETTINGS RESISTANCE RESISTANCE DIPSWITCH SETTINGS RESISTANCE DIPSWITCH SETTINGS DIPSWITCH SETTINGS 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 2 3 4 5 6 7 8 9 1 0 2 3 4 5 6 7 8 9 1 0 2 3 4 5 6 7 8 9 1 0 2 3 4 5 6 7 8 9 1 0...
  • Page 7 RESISTANCE RESISTANCE RESISTANCE RESISTANCE DIPSWITCH SETTINGS DIPSWITCH SETTINGS DIPSWITCH SETTINGS DIPSWITCH SETTINGS 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 1 1 1 0 0 1 0 1 0...
  • Page 8 RESISTANCE RESISTANCE RESISTANCE RESISTANCE DIPSWITCH SETTINGS DIPSWITCH SETTINGS DIPSWITCH SETTINGS DIPSWITCH SETTINGS 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP VALUES 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 0 1 0 0 1 0 1 0 0 1...
  • Page 9 RESISTANCE RESISTANCE RESISTANCE RESISTANCE DIPSWITCH SETTINGS DIPSWITCH SETTINGS DIPSWITCH SETTINGS DIPSWITCH SETTINGS VALUES VALUES VALUES 0=DOWN / 1=UP 0=DOWN / 1=UP 0=DOWN / 1=UP VALUES 0=DOWN / 1=UP 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 1 0 1 1 1 1 0 1 1...

Table of Contents