HP Pavilion All-in-One MS200 - Desktop PC Getting Started Manual page 42

Performance
Symptom
Computer displays a
processor speed that is
lower than expected.
Software programs and
files take longer than
expected to open or
respond.
Memory card reader
Symptom
Memory card reader
cannot read the
memory card.
38 Getting Started (features vary by model)
Possible solution
This happens when the processor is automatically running in a
lower power state, because the applications running do not
require the maximum processing power.
Verify that your system contains the processor you purchased.
To verify, click the Start button, right-click Computer, click
Properties, and under the General tab check the processor
installed on your system.
If you created multiple user accounts on your computer, ensure
other users are not logged in. If there are multiple users logged
in simultaneously, system resources must be shared among
them.
For information about other tasks, see "Maintenance tasks" on
page 42.
Possible solution
Do not insert or remove memory cards when the memory card
reader LED is flashing. Doing so may cause data loss or
permanent damage to the card reader.
Some memory cards have a Read/Write or a Security switch.
Ensure the switch is set to Write Enabled before you attempt to
write data to the card.
Ensure the amount of stored data does not exceed the storage
limit of the memory card.
Ensure the memory card is one of the supported types:
Memory Stick (MS), Memory Stick Pro (MS Pro),
MultiMediaCard (MMC), Secure Digital (SD),
Secure Digital High-Capacity (SDHC), or Extreme Digital (xD).
Additional media card types can be supported by use of an
adapter sleeve: Mini Secure Digital (Mini SD),
Micro Secure Digital (Micro SD),
Reduced-sized MultiMediaCard (RS-MMC),
Memory Stick Duo (MS Duo), or
Memory Stick Pro Duo (MS Pro Duo).