Remote Supervisor Adapter Ii Slimline; Requirements - IBM x3400 - System - 7975 User Manual

Using custom configuration: To use custom configuration, complete the
following steps:
10. Exit from ServeRAID Manager, and remove the CD from the CD or DVD drive.
11. Restart the server.
Viewing the configuration
You can use ServeRAID Manager to view information about RAID controllers and
the RAID subsystem (such as arrays, logical drives, hot-spare drives, and physical
drives). When you click an object in the ServeRAID Manager tree, information about
that object appears in the right pane. To display a list of available actions for an
object, click the object and click Actions.

Remote Supervisor Adapter II SlimLine

You can use an optional Remote Supervisor Adapter II SlimLine to obtain enhanced
system management capabilities, beyond those of the integrated baseboard
management controller (BMC). The Remote Supervisor Adapter II SlimLine has a
dedicated Ethernet connection at the rear of the server.
This section describes how to set up, cable, and configure the Remote Supervisor
Adapter II SlimLine so that you can manage the server remotely.
In addition to the information in this section, see the IBM Remote Supervisor
Adapter II SlimLine documentation for information about how to configure and use
the Remote Supervisor Adapter II SlimLine to manage the server remotely through
the Web-based interface or the text-based interface.
Note: The Web-based interface and text-based interface do not support
double-byte character set (DBCS) languages.

Requirements

Make sure that the following requirements are met:
v The Web interface Remote Disk function requires the client system to be running
90
System x3400 Types 7973, 7974, 7975, and 7976: User's Guide
1. In the ServeRAID Manager tree, click the controller.
2. Click Custom configuration.
3. Click Next.
4. In the "Create arrays" window, from the list of ready drives, select the two
drives that you want to group into the array.
5. Click the (Add selected drives) icon to add the drives to the array.
6. If you want to configure a hot-spare drive, complete the following steps:
a. Click the Spares tab.
b. Select the physical drive that you want to designate as the hot-spare drive,
and click the icon to add the drive.
7. Click Next.
8. In the "Configuration summary" window, review the information. To change the
configuration, click Back.
9. Click Apply; when you are asked whether you want to apply the new
configuration, click Yes. The configuration is saved in the controller and in the
physical drives.
Microsoft Windows 2000 or later. The Web interface Remote Control features
™
require the Java 1.4 Plug-in or later. The following Web browsers are supported:
– Microsoft Internet Explorer version 5.5 or later with the latest Service Pack