Default Configuration For Service Processor Customer Lan (All Npartition Servers); Default Configuration For Service Processor Private Lan (Hp Superdome Servers Only) - HP rp7420 User Manual

On HP Superdome servers, the customer LAN port is labeled "Customer LAN". On HP
rp8400 servers, it is "GSP LAN". On HP rp7405/rp7410 servers, it is the only LAN connection
on each core I/O board.
• Private LAN for Service Processor (Superdome Only)
Superdome service support processor (SSP) workstation, also called the service management
station (SMS).
Only Superdome servers have a private LAN. Do not use the private LAN on the HP sx1000
chipset-based Superdome servers.
To configure service processor network settings, you can use the LC command from the Command
menu.
To list the current service processor network configuration use the LS command.
The following examples show service processor LAN status for several HP nPartition servers.
Default Service Processor Network Settings
LAN and private LAN network settings for nPartition servers. Only Superdome servers have a
private LAN.
Table 2-1 Default Configuration for Service Processor Customer LAN (All nPartition Servers)
Customer LAN IP Address
Customer LAN Host Name
Customer LAN Subnet Mask
Customer LAN Gateway
Table 2-2 Default Configuration for Service Processor Private LAN (HP Superdome Servers Only)
Private LAN IP Address
Private LAN Host Name
22 Using the Service Processor
The private LAN connects to the
Table 2-1 and Table 2-2
192.168.1.1
gsp0
255.255.255.0
192.168.1.1
192.168.2.10
priv-00
list the default customer