Lowering Volume Quickly; Setting Time; Radio; Listening To Radio - Alpine CDE-9874 Owner's Manual

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press /MUTE (CDE-9874 only) or MUTE/SETUP
(CDE-9872 only) to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing /MUTE (CDE-9874 only) or MUTE/SETUP
(CDE-9872 only) again will bring the audio back to its
previous level.

Setting Time

1
Press and hold SOUND/SETUP (CDE-9874 only) or
MUTE/SETUP (CDE-9872 only) for at least
2 seconds to activate the SETUP mode.
2
Turn the Rotary encoder (CDE-9874 only) or press
and (CDE-9872 only) to select the CLOCK ADJ
mode, and then press
The time indication will blink.
3
Turn the Rotary encoder (CDE-9874 only) or press
and (CDE-9872 only) to adjust the hours while
the time indication is blinking.
4
When the hour has been adjusted, press
5
Turn the Rotary encoder (CDE-9874 only) or press
and (CDE-9872 only) to adjust the minutes
while the time indication is blinking.
6
Press and hold SOUND/SETUP (CDE-9874 only) or
MUTE/SETUP (CDE-9872 only) for at least 2
seconds to return to normal mode.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold
after setting the "hour." Minutes will reset to "00". If the display
shows over "30" minutes when you do this, the time will advance one
hour.
• Pressing /MUTE (CDE-9874 only) or
only) will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
/ /ENT.
/ /ENT.
/ /ENT for at least 2 seconds
/AUDIO (CDE-9872

Radio

CDE-9874
SOURCE/
TUNE/A.ME
BAND
CDE-9872
SOURCE/
TUNE/A.ME BAND

Listening to Radio

1
Press SOURCE/ to select TUNER mode.
2
Press BAND repeatedly until the desired radio band
is displayed.
F1 (FM1) F2 (FM2) AM
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode)
OFF (Manual mode) DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press or to tune in the desired station.
Holding down or
continuously.
Preset buttons
(1 through 6)
Preset buttons
(1 through 6)
F1 (FM1)
SEEK (Local mode)
will change the frequency
7
-EN