Setting The Aux+ Setup Mode; Setting The Aux Name Mode (Cde-9874 Only); Ipod ® (Optional) - Alpine CDE-9874 Owner's Manual

Alpine owner's manual mp3/wma/aac cd receiver cde-9874, cde-9872
Table of Contents

Advertisement

Available languages

Available languages

CDE-9872:
POW ON :
The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.

Setting the AUX+ SETUP Mode

AUX+ ON / AUX+ OFF (Initial setting)
An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
AUX+ ON:
Set to ON when a portable device is connected. If
SOURCE/
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPod is connected.

Setting the AUX NAME mode (CDE-9874 only)

1
AUXILIARY*
(Initial setting) / TV / DVD / PORTABLE*
You can change the AUX NAME display in the SETUP mode.
1
*
After the setting is completed, AUX is displayed on the unit.
2
*
After the setting is completed, PMD is displayed on the unit.
Front
left
Amplifier
Front
right
Speakers
Front
right
Rear
right
Rear
left
Front
left
is pressed and AUX+ is selected, the
2
/ GAME
®
iPod
(Optional)
CDE-9874
/ESC
Rotary encoder
/
/
ENT
SOURCE/
1
/MUTE
CDE-9872
/ESC
SOURCE/
/
/
ENT
/
AUDIO
®
An iPod
can be connected to this unit by using the proprietary
ALPINE FULL SPEED
Connection Cable (KCE-422i) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
• Set AUX+ SETUP to OFF when an iPod is connected (refer to
"Setting the AUX+ SETUP Mode" on page 17).
• If the Bluetooth Box and an iPod are connected at the same time, be
sure to disconnect the iPod from the Bluetooth Box while turning
ACC to OFF (CDE-9874 only).
iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod minis or iPod nano. iPod Shuffle
cannot be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod.
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
• If the unit is used with iPod software versions of iTunes earlier than
7.1.0.59, correct function and performance are not guaranteed.
2
4 5
6
Preset buttons
VIEW
(1 through 6)
1
2
4 5
6
VIEW
Preset buttons
(1 through 6)
17
-EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cde 9872 - radio / cdCde-9872

Table of Contents