Adjusting Volume; Lowering Volume Quickly; Setting The Time And Calendar; Radio - Alpine cda-9886 Owner's Manual

Alpine owner manual mp3/wma/aac cd receiver cda-9886
Hide thumbs Also See for cda-9886:
Table of Contents

Advertisement

Available languages

Available languages

Adjusting Volume

Turn the Rotary encoder until the desired sound is
obtained.

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its
previous level.

Setting the Time and Calendar

1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the General
mode, and then press
1
Bluetooth*
General
4
HD Radio*
Bluetooth
1
*
Displayed only when INT Mute is OFF and the mode is set to other
than Bluetooth Audio.
2
*
Only when XM Radio is connected.
3
*
Only when SIRIUS Radio is connected.
4
*
Only when HD Radio is connected.
3
Turn the Rotary encoder to select Clock Adjust,
and then press
/ENT.
4
Turn the Rotary encoder to set year.
5
Press
/ENT.
6
Repeat steps 4 and 5 above to set month, day, hour
and minute.
7
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing
/ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold
setting the "hour". Minutes will reset to 00. If the display shows over
"30" minutes when you do this, the time will advance one hour.
8
-EN
/ENT.
2
3
Display
XM*
/SIRIUS*
/ENT for at least 2 seconds after

Radio

Rotary encoder
SOURCE/
/
/
BAND
TUNE/A.ME
/ESC
This unit cannot receive HD Radio™ signals (digital terrestrial radio).
In order to activate the digital radio functions described below, an
optional HD Radio Tuner module must be connected through the
Ai-NET bus.
HD Radio™ Technology Manufactured Under License From iBiquity
Digital Corporation. iBiquity Digital and the HD Radio and HD
Symbols are trademarks of iBiquity Digital Corporation. U.S. and
Foreign Patents.

Listening to Radio

1
Press SOURCE/
to select TUNER mode.
2
Press BAND repeatedly until the desired radio band
is displayed.
FM1
FM2
AM
FM1
3
Press TUNE/A.ME to select the tuning mode.
DX (Distance mode)
LOCAL (Local mode)
MANUAL (Manual mode)
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
or
to tune in the desired station.
Holding down
or
continuously.
• If Digital Seek is set to ON, the SEEK UP/DOWN functions only stop
on digital station frequencies while receiving HD radio. Refer to
"Digital Seek ON/OFF Setting" (page 21).
/ENT
Preset buttons
(1 through 6)
DX
will change the frequency

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents