Technical specifications Pro-Ject Receiver Box
Power output:
Tuning range FM-band:
Programmable presets:
THD tuner:
Stereo separation:
Sensitivity:
Frequency response:
Channel separation:
Noise floor:
THD amplifier:
Gain:
Line-level inputs:
Input impedance:
Antenna input:
Outboard power supply:
Power consumption:
Replacement battery remote control:
Dimensions W x H x D (D with sockets): 103 x 36 x 103 (122)mm
Weight:
Service
Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
PRO-JECT is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Audio Trade GmbH
Copyright © 2010. All rights reserved.
6
© Audio Trade GmbH · Pro-Ject Receiver Box · Revision 15.10.10/15.12.10
2 x 20W/30W at 8ohms/4ohms (both channels driven)
87,5 - 108,5MHz
(50kHz
99
0,05% / ∆f 75kHz and f mod 1kHz
30dB / ∆f 75kHz and f mod 1kHz
7dB/µV mono, 17dB/µV stereo /75 ohms
20Hz - 20kHz (±0,2dB)
> 40dB at 20kHz
> -100dB (A weighted)
< 0,05% at 10W
22dB
1 pair RCA/Phono sockets, 3-pole 3,5mm co-axial jack
20kohms
1 x co-axial DIN-socket (75 ohms) / US-model F-socket
20V/3A DC (peak 7A DC), suitable for your country's mains supply
20V/3A DC
1 x CR2032 / 3V or 1 x CR2025 / 3V
670g without power supply
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
steps)
Need help?
Do you have a question about the Receiver Box and is the answer not in the manual?
Questions and answers