Pro-Ject Audio Systems USB Box Instructions For Use Manual
Pro-Ject Audio Systems USB Box Instructions For Use Manual

Pro-Ject Audio Systems USB Box Instructions For Use Manual

Advertisement

INSTRUCTIONS FOR USE
Pro-Ject USB Box

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the USB Box and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pro-Ject Audio Systems USB Box

  • Page 1 INSTRUCTIONS FOR USE Pro-Ject USB Box...
  • Page 2 Make all connections whilst the USB Box is disconnected from the amplifier. Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white. © Audio Trade GmbH · Pro-Ject USB Box · Revision 15.10.10/15.12.10...
  • Page 3: Operating System

    Playback section. Make sure from the pull-down lists (usually preselected). your sound card is selected for Recording. 7. Confirm your selections by clicking the OK button and close the control panel windows. © Audio Trade GmbH · Pro-Ject USB Box · Revision 15.10.10/15.12.10...
  • Page 4 Hardware and Sound Sound Playback In the Playback panel Burr-Brown PCM2702 (announced as Speakers) should be selected (usually preselected). 4. Click the OK button and close the control panel windows. © Audio Trade GmbH · Pro-Ject USB Box · Revision 15.10.10/15.12.10...
  • Page 5 Hardware and Sound Sound Playback In the Playback panel USB Audio Device (announced as Speakers) should be selected (usually preselected). 3. Click the OK button and close the control panel windows. © Audio Trade GmbH · Pro-Ject USB Box · Revision 15.10.10/15.12.10...
  • Page 6 2. Open the System Preferences panel and select SOUND. 3. Open the Sound panel and select Output. 4. Select Burr-Brown Japan PCM2720 in the Output panel. 3. Confirm the settings and close all windows. © Audio Trade GmbH · Pro-Ject USB Box · Revision 15.10.10/15.12.10...
  • Page 7 CD device resampling Sound card to 48kHz Pro-Ject Direct Streaming allows bit-by-bit processing. This avoids unwanted signal alteration of the original signal through by-passing the Windows ® Kernel Mixer of your PC. For replay a suitable software player, like for instance foobar2000, will be needed.

This manual is also suitable for:

Switch box

Table of Contents