Volume; Mute; Dimming The Display; Input Selector - Pro-Ject Audio Systems Receiver Box Instructions For Use Manual

Using the Pro-Ject Receiver Box
87.90
MANUAL
Turning on/off
Press the rotary selector to switch the receiver on. After power is on the display will briefly show the Pro-Ject logo
before changing to the regular display of the input selected.
Press and hold the rotary selector for a few seconds to switch the unit off. The display will show POWER OFF
and STANDBY.
While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next
power on.

Input selector

After the unit is powered on, pressing the rotary selector selects the IN1 and IN2 inputs in turn. The display will
show the volume level and the selected input: TUNER, IN1 or IN2.
The optional input expander Pro-Ject Switch Box provides three more inputs. For further details please see the
user guide of the Pro-Ject Switch Box.

Volume

Adjust the volume (95 steps) to the desired level using the rotary selector. The display will show the volume
level set. -95dB indicates min., 00dB max..

Mute

While the unit is powered on,

Dimming the display

_
0
VOL
After pressing or
Available settings: DIM MIN, DIM 1 - DIM 4 and DIM MAX. The display will show the selected setting.
Display - input tuner
A B C
87.90
MANUAL
D
4
© Audio Trade GmbH · Pro-Ject Receiver Box · Revision 15.10.10/15.12.10
Receiver Box
0
ON/OFF
activates and deactivates mute
0
+
VOL
on the remote control,
A Signal strength meter
B Stereo reception
C Fine tuning meter
D Tuning mode. The rotary selector toggles between the tuning modes
E Tuned frequency
E
.
TUNE TUNE
or set the brightness of the display.
F Mono reception