Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pro-Ject Audio Systems Receiver Box
Summary of Contents for Pro-Ject Audio Systems Receiver Box
- Page 1 INSTRUCTIONS FOR USE Pro-Ject Receiver Box...
-
Page 2: Mains Power Connection
Connect the low voltage plug from the power supply to the Power 20V socket before connecting the power supply to the mains. © Audio Trade GmbH · Pro-Ject Receiver Box · Revision 15.10.10/15.12.10... -
Page 3: Remote Control
The display shows STORED. Saving a program to a particular memory position overwrites any program already stored at that position. The memory retains its contents through a power off/on cycle. © Audio Trade GmbH · Pro-Ject Receiver Box · Revision 15.10.10/15.12.10... -
Page 4: Dimming The Display
MANUAL Turning on/off Press the rotary selector to switch the receiver on. After power is on the display will briefly show the Pro-Ject logo before changing to the regular display of the input selected. Press and hold the rotary selector for a few seconds to switch the unit off. The display will show POWER OFF and STANDBY. - Page 5 Saving a program in the memory list The memory of the Pro-Ject Receiver Box can store up to 99 programs. Tune to the frequency of the program to be stored. Press the rotary selector twice in rapid succession. The display will show STORE. Rotating the rotary selector clockwise will select the next memory position up the list, anticlockwise will select the next memory position down the list.
- Page 6 This guide was produced by: Audio Trade GmbH changes to the technical specification without prior Copyright © 2010. All rights reserved. notice as deemed necessary to uphold the ongoing process of technical development. © Audio Trade GmbH · Pro-Ject Receiver Box · Revision 15.10.10/15.12.10...
Need help?
Do you have a question about the Receiver Box and is the answer not in the manual?
Questions and answers