Pioneer DJM-850-K Operating Instructions Manual page 21

SLIP ROLL
1 2
The sound being input at the point when the [ON/OFF] is pressed is
recorded, and the recorded sound is output repeatedly according to the
beat fraction set with the [BEAT c, d] buttons.
When the effect time changes, the input sound is recorded again.
Original
Changed from 1/2
Effect turned on
to 1/1
Roll
1/2 repeat
BEAT c, d buttons Use these to set an effect time of 1/16 – 16/1 with
(parameter 1) respect to the time of one beat of the BPM.
Use this to set the effect time.
TIME control (parameter 2)
10 to 4000 (ms)
LEVEL/DEPTH control Use this to set the balance between the original
(parameter 3) sound and ROLL.
ROLL
1 2
The sound being input at the point when the [ON/OFF] is pressed is
recorded, and the recorded sound is output repeatedly according to the
beat fraction set with the [BEAT c, d] buttons.
Original
Effect turned on
1/1 roll
Repeated
BEAT c, d buttons Use these to set an effect time of 1/16 – 16/1 with
respect to the time of one beat of the BPM.
(parameter 1)
Use this to set the effect time.
TIME control (parameter 2)
10 to 4000 (ms)
LEVEL/DEPTH control Use this to set the balance between the original
(parameter 3) sound and ROLL.
REV ROLL
1 2
The sound being input at the point when the [ON/OFF] button is pressed
is recorded, and the recorded sound is reversed then output repeatedly
according to the beat fraction set with the [BEAT c, d] buttons.
Original
Effect turned on
1/1 reverse
roll
Reversed and repeated
BEAT c, d buttons Use these to set an effect time of 1/16 – 16/1 with
(parameter 1) respect to the time of one beat of the BPM.
Use this to set the effect time.
TIME control (parameter 2)
10 to 4000 (ms)
LEVEL/DEPTH control Use this to set the balance between the original
(parameter 3) sound and ROLL.
1/1 repeat
SND/RTN
1
Connect an external effector, etc., here.
SEND
RETURN
POWER
MIC USB MASTER MIDI
LEVEL START
MIC1 CD/LINE PHONO USB CD/LINE LINE USB CD/LINE LINE USB CD/LINE PHONO USB ON/ OFF / STOP SETUP
1/2 3/4 5/6 7/8
WAKE UP
BEAT EFFECTS
OVER TRIM OVER TRIM OVER TRIM OVER TRIM 0
OVER
10 10 10 10 10
9 9 9 9
7 7 7 7 7
MIC 1 HI HI HI HI CH SELECT
4 4 4 4 4 1 2 3 4
0 LEVEL MIC A B MST
2 2 2 2 2
PARAMETER
MIC 2 1 1 1 1 1
AUTO
0 0 0 0 0 TAP BPM
0 -26 / 6 -26 / 6 -26 / 6 -26 / 6 %
MID MID MID MID ms
- 1 - 1 - 1 - 1 - 1
HI - 2 - 2 - 2 - 2 - 2
EQ/ EQ/ EQ/ EQ/
- 3 - 3 - 3 - 3 - 3
12 12 EQ ISO ISO ISO ISO
- 5 - 5 - 5 - 5 - 5
LOW -26 / 6 -26 / 6 -26 / 6 -26 / 6
- 7 - 7 - 7 - 7 - 7
LOW LOW LOW LOW
12 12 -10 -10 -10 -10 -10 BEAT
TALK
OFF ON OVER -15 -15 -15 -15 -15
-24 -24 -24 -24 -24
AUTO
-26 / 6 -26 / 6 -26 / 6 -26 / 6 TAP
dB dB dB dB L dB R / TAP
BEAT BEAT BEAT BEAT
COLOR COLOR COLOR COLOR BALANCE
NOISE GATE
SOUND COLOR FX CUE
CRUSH FILTER L R
LOW HI LOW HI LOW HI LOW HI
FILTER FLANGER
CUE CUE CUE CUE CUE TRANS PHASER
FADER START REVERB ROBOT
SPIRAL SLIP ROLL
1 2 3 4 UP ECHO ROLL
MONO STEREO ECHO REV ROLL
DELAY SND/ RTN
4 MIC
10 10 10 3 CF.A
HEAD PHONES 9 9 9 2 CF.B
BOOTH MONITOR
8 8 8 1 MASTER
MONO SPLIT STEREO 7 7 7
6 6 6
5 5 5
4 4 4 TIME
MIXING
3 3 3 0
2 2 2
EQ CURVE
1 1 1 ISOLATOR EQ
0 0 0
CUE MASTER
LEVEL LEVEL / DEPTH
CH FADER
A THRU B A THRU B A THRU B A THRU B
0 MIN MAX
CROSS FADER ASSIGN CROSS FADER ON / OFF
PHONES
A B
DJM-850
BEAT c, d buttons
—
(parameter 1)
TIME control (parameter 2) —
LEVEL/DEPTH control This adjusts the sound level input to the [RETURN]
(parameter 3) terminal.
1 If the sound of the channel you want to monitor is not output from
the [MASTER] channel when [CF.A], [CF.B] or [MASTER] is selected
with the [1, 2, 3, 4, MIC, CF.A, CF.B, MASTER] selector switch, the
effect sound cannot be monitored even by pressing the [CUE] button
for [BEAT EFFECTS].
2 If the effect is off, the effect sound cannot be monitored even by
pressing the [CUE] button for [BEAT EFFECTS].
Effector
En
21