Installation - Alpine CDE-9845 Owner's Manual

Installation

1
Mounting Sleeve
(Included)
No Pressure Here
No Pressure Here
CDE-9845/CDE-9843/CDE-9841
Remove the Detachable Front Panel (refer to page
5). Slide mounting sleeve from main unit. (see
"Removal" on this page).
Slide the mounting sleeve into the dashboard.
• Please examine the installation. Make certain that no external
pressure is applied to either the top of the unit or the removable
nosepiece.
2
Hex Nut (M5)
Metal
Mounting
Strap
*
Ground Lead
Chassis
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*) already
attached to the vehicle's chassis.
• For the screw marked **, use an appropriate screw for the chosen
mounting location.
Connect each input lead coming from an amplifier
or equalizer to the corresponding output lead
coming from the left rear of the CDE-9845/CDE-
9843/CDE-9841. Connect all other leads of the CDE-
9845/CDE-9843/CDE-9841 according to details
described in the CONNECTlONS section.
Dashboard
Screw
**
Bolt Stud
CDE-9845/CDE-9843/
CDE-9841
3
Slide the CDE-9845/CDE-9843/CDE-9841 into the
dashboard until it clicks. This ensures that the unit
is properly locked and will not accidentally come
out from the dashboard. Install the Detachable
Front Panel.
Removal
1 Remove the DETACHABLE FRONT PANEL.
2 Insert the optional brackets into the back, along the
guides on either side of the unit. The unit can now be
removed from the mounting sleeve.
This unit
3 Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
CDE-9845/
CDE-9843/
CDE-9841
Ground Lead
*
Mounting Bracket
• Secure the ground lead of the unit to a clean metal spot using a
screw (*) already attached to the vehicle's chassis.
Bracket (included)
Face Plate
Screws (M5 × 8)
(Included)
21
-EN