Setting Front Panel Brightness - Pace TDC776D Operator's Manual

2. Use the U and D arrows to highlight each option in turn. Use the SELECT button to choose
the setting you want (the setting changes each time you press SELECT).
3 If you wish to reset all the Closed Caption settings to their default values (mainly Auto), press the
D button to highlight "Reset to Defaults" in the menu, then press SELECT.
4. When you have made all the changes you want to make, press L twice to re-display the PACE
USER SETTINGS menu.

Setting Front Panel Brightness

You can use the Front Panel Brightness menu to set the brightness level of the front-panel display
when your set-top is being used ("Viewing TV" level) and when it is switched off ("Standby" level).
1. If you have not done so already, put your set-top into "user settings mode", as described on page
21. Then press the U or D button until the front panel shows "brit", as shown right.
2. Press the R button. The Front Panel Brightness menu, shown right, appears.
3. Press the U or D button to highlight "Standby Level" or "Viewing TV Level" as required.
4. Use the SELECT button to choose the setting you want (the setting changes each time you
press SELECT): "Low", "Std" (Standard) or "High". Look at the dimming and brightening of the
front-panel display while you are making the settings, to see the effect of your selections.
5. When you have made all the changes you want to make, press L to re-display the PACE USER
SETTINGS menu.
MAKING USER SETTINGS (cont.)
Front Panel Brightness
Standby Level : Std
Viewing TV Level : High
29