Using Your Set-Top's Dvr Functions - Pace TDC776D Operator's Manual

OPERATING YOUR SET-TOP (cont.)

Using your set-top's DVR functions

Your set-top has an internal hard disk that you can use to record and play back television programs,
giving you much more control of your viewing experience. For example, you can pause live television
and resume viewing from the point at which you left off. You can record many more hours than you
can by using a VCR or DVD recorder. There are red lights on your set-top's front panel to show
when recording is taking place. With your set-top you can:
• pause live TV;
• instantly replay live TV;
• fast-forward up to the point of live TV;
• watch a scene in slow motion;
• rewind through a program you have been watching;
• record high definition digital pictures (as well as the regular standard definition);
• record one program while watching another;
• record two programs while watching a previously recorded program;
• schedule your set-top to record a program or a whole series;
• fully manage your stored recordings;
• back up your digital recordings to a VCR or DVD recorder;
• retain full control over any parental viewing restrictions you have set up.
You control your set-top's DVR functions using your remote control; consult the information supplied
by your cable service-provider for more details. Also read the operating instructions that are supplied
18 with your remote control.
NOTES
The exact functionality of the
DVR (digital video recorder)
in your set-top depends on
your on-screen program guide.
For more details, consult the
information supplied by your
cable service-provider.
Do not confuse recording to the
hard disk with recording to a
separate VCR or DVD recorder,
as mentioned on page 20.
The DVR functions will not
work if your set-top becomes
overheated. The internal hard
disk will be temporarily disabled.
Refer to the set-top's ventilation
requirements on page 4.