Pace TDC776D Operator's Manual page 11

CABLE IN
Connect the cable service here.
TO TV Connect to the RF/antenna input on your TV or
VCR (optional).
VIDEO OUT
Connect to the composite video input on your
VCR (or a standard TV).
AUDIO OUT
Connect to the L and R audio inputs on your
stereo TV, stereo VCR or optional stereo amplifier.
TV PASS MODULE Connect a TV pass
COMPONENT If your HDTV does not have an HDMI
VIDEO below), connect your HDTV here.
S-VIDEO
Connect to the S-video input (if present) on your
VCR or TV.
IR RECEIVE
Connect to an optional remote "eye".
IR TRANSMIT Connect to an optional VCR controller (future use).
USB Connect to compatible optional equipment that
(Universal Serial supports a USB 2.0 interface.
Bus)
® module, if required.
TM (see
REAR PANEL (cont.)
HDMI
TM If your HDTV has an HDMI
(High Definition for a digital audio/video connection (instead of
Multimedia using the AUDIO and 3 analog COMPONENT
Interface) VIDEO connectors).
ETHERNET Connect to an optional PC network.
SATA Connect to an optional external hard disk
(if enabled by your cable service-provider).
DIGITAL AUDIO Connect to the electrical digital audio input on
OUT optional digital audio equipment, such as an audio
decoder or home theater receiver.
Connect to the optical digital audio input on
OPTICAL AUDIO
OUT
optional digital audio equipment.
POWER OUTLET Connect your TV's power cord here to provide
AC power to your TV.
POWER INPUT Connect your set-top's power cord here.
TM , connect it here
9