Pace TDC776D Operator's Manual page 27

4. When you are satisfied that all the TV resolutions are correct, press the L button. The front panel
shows "reS" again. To continue making the settings, see page 26.
SELECT
SELECT
SELECT
Further information about the TV Display Capability
The TV Display Capability settings relate to equipment that is connected to the HDMI
COMPONENT VIDEO OUT connectors because the settings control the output at those
connectors. If equipment is connected via an HDMI
information back to your set-top, which may affect what settings are available.
Generally, the TV Display Capability settings do not affect equipment connected to the VIDEO OUT
and S-VIDEO jacks, because the output at these jacks will always be the standard definition 480i.
This diagram shows an example only. Please make
sure that, for each resolution, you select the correct
setting (yes or no) that applies to your TV.
TV Display Capability
1080i : NO
720p : NO
480p : YES
480i : YES
The on-screen
menu shows the
SELECT
selected setting.
TV Display Capability
1080i : YES
720p : NO
480p : YES
480i : YES
cable, that equipment may also pass
TM
MAKING USER SETTINGS (cont.)
TM and
25