Original Preview - Olivetti d-Copia 3000MF Operation Manual

Basic Operation

Original Preview

3-10
You can display a preview image of the scanned document on the panel.
NOTE:
To view a preview of an image stored in a Custom Box, refer to
the Advanced Operation Guide.
The procedure for previewing scanned originals is explained below.
The procedure described here is for copying a single-page original.
1 Place the original on the platen and press the Copy key.
2 Press [Preview].
3
The machine starts scanning the original. When scanning is completed,
the preview image appears on the panel.
4 To change the
quality or the layout,
press [Change
Setting]. Change the
settings and press
[Preview] again to
see a preview image
with the new
settings.
NOTE:
If you scan a multi-page original, only the first page is previewed.
If you are compiling multiple pages, first press [Preview], scan all the
originals, and then press [Scan finish], and a preview of the first page is
displayed.
To change the mode when a preview image is displayed, press Reset key
and then change the mode.
For booklet copying, the finished page including the lead page of the
original is displayed.
Preview is not available if a high compression PDF is selected.
Ready to copy.
Copy Image
Set Original.
Auto
Zoom
Original : - - -
Zoom : 100%
1-sided Text+Photo
- - -
Paper :
>>1-sided
Duplex
Preview
Quick Setup Org./Paper / Image
Finishing Quality
Status
Ready to copy.
Copy Image
100% Normal 0
Zoom
Original :
Letter
Zoom :
100%
Paper : 1-sided Text+Photo
Letter
>>1-sided
Duplex
Change Setting
Quick Setup
Org./ Paper / Image
Finishing Quality
Status
Copies
Interrupt
Normal 0 Letter
Plain
Density Paper
Selection
Collate
Original Collate/
Image Offset
Layout /Edit Advanced
Setup
10/10/2007
Copies
Interrupt
Auto
Density Original
Size
Collate
Original Collate/
Image Offset
Layout /Edit Advanced
Setup
10/10/2007
OPERATION GUIDE
1
10 :10
1
10 :10