Character Entry Method - Olivetti d-Copia 3000MF Operation Manual

Character Entry Method

Entry Screens
Appendix-2
To enter characters for a name, use the on-display keyboard in the touch
panel following the steps as explained below.
NOTE:
QWERTY, QWERTZ and AZERTY are available as keyboard
layouts the same as a PC keyboard. Press the System Menu, [Common
Settings] and then [Change] of Keyboard to choose desired layout.
QWERTY layout is used here as an example. You may use another layout
following the same steps.
Lower-case Letter Entry Screen
Path
1
6
Upper -case
No. Display/Key
1 Display
2 Limit Display
3 Cursor Key
4 [Backspace]
5 Keyboard
6 [Upper-case]
7 [Lower-case]
8 [No./Symbol]
9 [Space]
Use the keyboard to enter.
Lower-case No./Symbol
7 8 9
Displays entered characters.
Displays maximum number of characters.
Press to move the cursor on the display.
Press to delete a character to the left of the
cursor.
Press a character to enter.
Press to use upper-case letters.
Press to use lower-case letters,
Press to enter numbers and symbols.
Press to insert a space.
Limit: 126 characters
Input : characters 0
Backspace
Space
Cancel OK
10 11
Description
OPERATION GUIDE
2
3
4
5