Miele W 320 Operating Instructions Manual page 39

Check drain
Check inlet
Excess detergent
Main wash
Anti-crease/Finish
A To switch off the fault indicator: Switch off the machine with the I-ON/0-OFF but-
ton and turn the programme selector to Finish
The drain outlet is re-
stricted.
The water inlet is re-
stricted.
The filter in the inlet
hose is dirty.
Excessive foam has
built up during wash-
ing.
There is a fault.
The position of the programme selector was altered
after the start of the programme. Turn the
programme selector back to the programme previ-
ously chosen.
Clean the fluff (drain) filter
and drain pump.
Check whether
– the stopcock is opened
wide enough.
– the inlet hose is kinked.
Clean the filter.
Use less detergent next
time and follow the recom-
mendation on the packag-
ing.
Start the programme again.
If the fault indicator occurs
again, contact the Service
Dept.
A
39