Miele W 320 Operating Instructions Manual page 38

Check drain
Check inlet
Soak/Pre-wash
Rinses
A To switch off the fault indicator: switch the washing machine off with the
I-ON/0-OFF button and turn the programme selector to Finish .
38
The water outlet is
blocked.
The drain hose has been
fixed too high.
The water inlet is blocked. Open the stopcock.
The filter in the water inlet
hose is dirty.
There is a fault.
A
Clean the fluff (drain) fil-
ter and drain pump.
The maximum drain
height is 1 m.
Clean the filter.
Start the programme
again.
If the fault indicators oc-
cur again, contact the
Service Department.