Suds Cooling In The Cottons Programme - Miele Paragon Plus Operating Instructions Manual

Suds cooling in the Cottons
programme
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Suds cooling takes place when
temperatures of 95°C and 75°C are
selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
Suds cooling for the Cottons
programme deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is properly closed.
Programmable functions
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
C Wait until the indicator light for the
Start/Stop button comes on . . .
D . . . and then release the Start/Stop
button.
E Press the Buzzer button twice.
– The Buzzer indicator light will flash
three times.
A P will flash in the display alternating
with the number 0 or 1.
0 = Suds cooling is deactivated.
1 = Suds cooling is activated.
F Press the Start/Stop button to
change the display from 0 to 1 or
from 1 to 0.
G Switch the machine off with the I-On/
0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
59