Table of Contents
Advertisement
J-2
Separation and feed block (Paper jam)
Possible cause
Step
Print Paper
1
Static-charge
2
eliminator
Fixing and paper delivery block (Paper jam)
J-3
Possible cause
Step
Fixing unit
1
entrance guide
2
Fixing unit
Separation
guide
Paper delivery
3
actuator
4
Changeover
guide
Delivery rollers
Paper jam
5
remove cover
Rear cover
Check
Is a recommended type of paper being used?
Is the static-charge eliminator dirty?
Check
Is the entrance guide dirty?
Is the separation guide worn or deformed?
Is the paper sensor arm movement smooth?
Is the changeover guide movement smooth?
Is the delivery roller movement smooth?
Are there dirts or flaws on the ribs of the jam
remove cover and rear cover?
Result
No
Yes
No
Result
Yes
Yes
Yes
No
No
No
VI - 21
Remedy
Instruct the user to use
recommended type of paper.
Clean the static-charge
eliminator.
Replace the transfer base assy.
Remedy
Clean the entrance guide.
Replace the fixing unit.
Replace the fixing unit.
Replace the changeover
guide.
Replace the rear cover assy.
Replace the jam remove cover
and the rear cover assy.
Advertisement
Table of Contents
Troubleshooting
