Changeover Guide, Jam Remove Cover; Side Cover R - Brother 1660E Service Manual

1.5.2

Changeover guide, jam remove cover

(1) Open the jam remove cover by hooking your finger on 2 dents ( A ).
(2) Remove the jam remove cover with its center part opened by bending the arm of the
boss both on sides ( B ) toward the front ( C ).
(3) Remove the changeover guide from the boss by bending the right hook (viewed from the
rear) of the rear cover ( D ), then remove the changeover guide ( E ).
Rear cover assy
Changeover guide
Jam remove cover

1.6 Side Cover R

(1) Remove the side cover R by releasing the 4 hooks.
Front
A
C
Dents
Figure 4.7
Note: Before releasing the 4 hooks, remove
Figure 4.8
IV - 5
Hole
Boss
D
E
B
Rear
Side cover R
Hook at 4 places
the paper tray.