Features; Midi Features - M-Audio Ozonic User Manual

The Ozonic has 40 assignable MIDI controllers that include a joystick, 8 knobs, 9 sliders, Pitch Bend and Modulation wheels, and 14 assignable
buttons (including Transport buttons). The keyboard also has an assignable Aftertouch control.
There are also 6 real-time function buttons that include Zone and Group controls and10 memory access buttons that can access the 20
on-board memories.

Features

Main Keyboard
< 37-note full-size, touch-sensitive, synth-action keybed, with
assignable Aftertouch controller
< 1 MIDI In / 1 MIDI Out port
< joystick controller
< 8 fully assignable rotary MIDI controller knobs
< 9 assignable sliders
< 14 assignable buttons (including Transport)
< 10 Preset Select buttons with 2 layers and dual-function
keypad
Power:
< FireWire bus powered*
MIDI Data from buttons:
< Note On
< Note On/Off Toggle
< MIDI CC On/Off Toggle

MIDI Features:

Ports:
< External MIDI Out
< External MIDI In
MIDI Data from controllers:
< MIDI control number
< RPN/NRPN
< GM/GM2/XG SysEx Messages
< All controls fully programmable
to MIDI controller number
< All controls fully programmable to MIDI channel
< Drawbar mode for faders
Audio
< 4 x 6 analog I/O on 1 x XLR mic input, 1 x 1/4" instrument input
and 2 x 1/4" TS jacks
< 2 x TRS (balanced) and 2 x TS outputs
< 1 Headphone output
< Headphone Level knob
< Headphone Stream Select/Merge knob
< Direct Monitor Level knob
*Powered 6-pin FireWire port required for bus-powered operation
Note: 6-Pin PCMCIA cards do not supply power
< assignable Pitch Bend and Modulation wheels
< 20 non-volatile memories
< 5 Transport Control buttons
< Octave and Transpose Up and Down buttons
< Sustain Pedal input
< Expression Pedal input
< 6 real-time function buttons
< 12 V DC power port
< On/Off button
< DC IN for external PSU if not using FireWire bus for power
< Program, Bank LSB, Bank MSB presets
< MIDI Machine Control functions
< GM/GM2/XG SysEx Messages
< 2 x FireWire MIDI Out (one to MIDI Out, one to keyboard)
< 2 x FireWire MIDI In
< Controller Mute, mutes controller output to avoid parameter
jumps
< Memory Dump via SysEx
< Enigma librarian and parameter editor for storing and
organizing setups
< Pitch Bend
< Program, Bank LSB, Bank MSB
< Phantom Power On/Off switch for XLR input on rear of unit
and activation LED for Input 1 on top panel
< Gain Control dual concentric knob for Inputs 1 & 2
< Signal/Clip LEDs for each Gain Control
< Volume sliders for Outputs 1 & 2 and Outputs 3 & 4
4