GE PGP990DENBB Owner's Manual & Installation Instructions page 30

Questions? Call 800.GE.CARES (800.432.2737)
B
•
for local inspector's use.
•
codes and ordinances.
•
instructions with the Consumer.
•
for future reference.
If you are using LP (bottled) gas,
all adjustments described in the following steps must be
made before attempting burner adjustments or use of the
cooktop.
This conversion kit shall be
installed by a qualified service agency in accordance
with the manufacturer's instructions and all applicable
codes and requirements of the authority having
jurisdiction. If the information in these instructions is
not followed exactly, a fire, explosion or production of
carbon monoxide may result, causing property damage,
personal injury or loss of life. The qualified service agency
is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation
of the converted appliance is checked as specified in the
manufacturer's instructions supplied with the kit.
Save these instructions
Observe all governing
Be sure to leave these
Keep these instructions
or
Visit our Website at:
• This cooktop is factory set for natural gas operation.
Conversion to LP operation should be performed by a
qualified technician or installer. Keep these instructions
for future reference. When converting to LP, save the
original parts for possible future use.
• Product failure due to improper installation is not
covered under the GE Appliance Warranty.
Small, thin-blade flat screwdriver with approximately 1/8"
blade width is needed to access the calibration screw.
Brass orifices
Stick-on conversion label
30
GEAppliances.com
Adjustable wrench
4
1