Table Of Contents - Focal FLEX POWER 2120 User Manual

flex power
U s e r m a n u a l
Contents
Safety instructions
Flex power
2120
1 - Characteristics
1.1 Contents
1.2 Connectors
1.3 Dimensions
1.4 Technical specifications
2 - Installation
2.1 Front panel description
2.2 Rear panel description
2.3 Installation advice
3 - Chassis mounting
3.1 Mounting on a flat surface
3.2 Mounting in a rack
4 - Connections
4.1 Sound level remote control (VCA)
4.2 Input 1 description
4.3 Inputs 2, 3 and 4 description
4.4 Inputs 1, 2, 3 and 4 connections
4.5 ZONE 1 output connection
• stereo into 4/8 ohms
• double mono into 4/8 ohms
• stereo/double mono 100V line
• stereo/double mono 70V line
• stereo/double mono 25V line
• low and high impedance mixed connection
4.6 ZONE 2 output connection
4.7 STANDBY REMOTE connection (standby control)
5 - Setting procedure
5.1 Output level setting
5.2 Input sensitivity setting (inputs 1 to 4)
5.3 Signal and clipping diodes: inputs 1 to 4 state
5.4 Vox sensitivity and priority setting (Input 1)
5.5 Tone setting
5.6 Auxiliary Input and Boost level setting
5.7 Zone 1 and Zone 2 mixing switch
2120
5
Page : 03
Page : 07
Page : 08
Page : 09
Page : 10
Page : 11
Page : 12
Page : 12
Page : 13
Page : 13
Page : 14
Page : 15
Page : 18
Page : 19
Page : 20
Page : 21