Standby Remote Connection (Standby Control) - Focal FLEX POWER 2120 User Manual

flex power
U s e r m a n u a l

4.7 STANDBY REMOTE connection (standby control)

A standby control can be activated using a dry contact (switch) connected to the STANDBY REMOTE input. This is a safety function to cut off
the public address system in the event of an emergency or for putting the system automatically on standby, when connected to a timer (power-
saving mode with consumption lower than 2 W in standby mode).
2120
switch
L
R
6 mm jack
balanced connectors
6 mm jack
balanced connectors
6 mm jack
unbalanced stereo connectors
19