Inputs 1, 2, 3 And 4 Connections; Zone 1 Output Connection; Stereo Into 4/8 Ohms - Focal FLEX POWER 2120 User Manual

flex power
U s e r m a n u a l
4.4 Inputs 1. 2, 3 and 4 connection
2
3
XLR
1
1 2
3
Microphone (balanced)
CD
MD
RCA

4.5 ZONE 1 output connection

a. Stereo into 4/8 ohms
To activate the ZONE 1 amplification output in low impedance (4Ω /8Ω) and in stereo, proceed as follows:
1. Set the MONO selector on the front panel to OFF.
2. Set the LINE 25/70/100 V" switch to OFF position.
3. Connect the loudspeaker cables to the "4Ω/8Ω" and "" outputs of the
polarity of the enclosures is correct: the "4Ω/8Ω" terminal is the positive pole to be connected to the enclosure's "+" (red) connector, the
negative " " terminal to the "-" (black) connector.
4. Repeat operations 1, 2, 3 for the "LINE 25/70/100 V" switch and the
2120
1
1
2
RCA line (unbalanced)
+
-
XLR
3
table de
2
mixage
1
1
3
2
1 2
3
2
SPEAKER ZONE 1 (Left)
SPEAKER ZONE 1 (Right)
Line (balanced)
Euroblock terminal. Make sure the
Euroblock terminal.
+
-
15