Summary Of Hardware Features - 3Com 3C17709 Getting Started Manual

Summary of
Hardware Features
Table 3 summarizes the hardware features that are supported by the
3Com Switch 4050 and 4060.
Table 3 Hardware features
Feature
Addresses
Forwarding Modes
Duplex Modes
Flow Control
Smart auto-sensing
Traffic Prioritization
Fast Ethernet and
Gigabit Ethernet Ports
Mounting
Layer 3 Switching
Replaceable PSUs
Hot Swap Fans
XRN Support
About the 3Com Switch 4050 and 4060
3Com Switch 4050/4060
Up to 12,000 supported
Up to 64 permanent entries
Store and Forward
Half duplex only supported on
10BASE-T/100BASE-TX/1000BASE-T Mbps ports in
10/100 Mbps mode
All 1000 Mbps ports are full duplex only
Supported on all ports
Supported on all 10BASE-T/100BASE-TX/1000BASE-T
ports.
Not supported on 1000BASE-SX and GBIC ports.
Supported (IEEE Std 802.1D, 1998 Edition)
Four traffic queues per port
Auto-negotiating 10BASE-T/100BASE-TX/1000BASE-T,
1000BASE-SX and GBIC ports
19-inch rack or stand-alone mounting
Support for wire-speed IP routing
Replaceable PSU and slot for optional second replaceable
PSU
Two identical hot swap fan trays are fitted
eXpandable Resilient Networking (XRN) support. Allows
interconnection of two units to create a Distributed
Fabric.
13