Deleting Part Of A Scene (Avchd) - Panasonic HC-X900 Operating Instructions Manual

Deleting part of a scene (AVCHD)

Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥ Change the mode to
AVCHD scene. (l 30)
1
Select the menu.
: [EDIT SCENE] # [SECTION DELETE
MENU
2
Touch the scene with a part to delete.
3
Slide while touching the two top and bottom
section selection buttons
section to delete
≥ It is convenient to use Slow-motion Playback and Frame-
by-frame Playback. (l 84)
4
Touch [ENTER].
5
Touch [YES] and confirm (play back) the edited scene.
≥ When [NO] is touched, a confirmation message appears. Proceed to Step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Touch [ENTER].
≥ To continue deleting parts from other scenes, repeat Steps 2-7.
≥ Deleting of part cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when middle part of a scene is deleted.
≥
HC-X900M
The relay information is deleted when part of a scene that was relay recorded is deleted,
making it impossible to perform [RELAY SCENE COMBINE]. (l 102)
and touch the play mode select icon. Then, select the
]
and set the
- 98 -
0h00m15s 0h00m15s 0h00m15s