Remote Control - Panasonic HC-X900 Operating Instructions Manual

/
HC-X900 HC-X900M

[REMOTE CONTROL]

Please refer to page 43.
[REC LAMP]
/
HC-X900 HC-X900M
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the Self-timer is counting down.
HC-X800
The recording lamp lights up during recording and flashes when the Self-timer is counting
down.
When this is set to [OFF], it does not light during recording.
[ALERT SOUND]
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
(Volume low)/
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 149)
[SELECT OPERATION
ICONS]
You can change the operation icons displayed in the Touch Menu.
Register 3 favourite operation icons.
≥ This function's default settings are
Compensation) for Motion Picture Recording Mode, and
(Self-timer) and
1 Touch [SELECT OPERATION ICONS].
2 Touch the operation icon you would like to change to cancel the setting.
3 Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
≥ For details about function of each operation icon, refer to page 51.
[ON]/[OFF]
[ON]/[OFF]
/
(Volume high)
(Fade),
(Backlight Compensation) for Still Picture Recording Mode.
- 38 -
/[OFF]
(PRE-REC) and
(Built-in flash),
(Backlight