Adjusting 3D Effect Of The 3D Image - Panasonic HC-X900 Operating Instructions Manual

2
Touch [3D].
[2D/3D]: Recorded image (2D/3D) is played back as is.
[3D]: Images recorded in 2D are converted to 3D image and played back.
(Play back scenes recorded in 3D in unaltered form as 3D image.)
[2D]: Images recorded in 3D are converted to 2D image and played back.
≥ [2D/3D] is displayed only during the Playback Mode.
3
Touch the scenes or still pictures to be played back.
∫ To convert to 3D (2D) image while playing back
1 Play back the scenes or still pictures.
2 Touch (
≥ Images recorded in 2D (3D) are converted and played back
as 3D (2D).
≥ It will playback the converted image until the playback is
completed even if the scene is switched.
≥ Setting in the 2D/3D display icon or the [2D/3D DISPLAY]
will not change.
≥ When image is converted to 3D (2D), image will not display on TV for a few seconds.
≥ Highlight Playback cannot be converted to 3D image.
≥ Scenes or still pictures converted to 3D (2D) images cannot be saved as 3D (2D) images.

Adjusting 3D effect of the 3D image

It is possible to adjust the disparity of the scenes and still pictures playing back in 3D for
better view.
1 Play back scenes or still pictures recorded in 3D.
2 Touch .
≥ Playback disparity adjustment bar is displayed while
displaying in 3D.
3 Touch /
≥ Playback disparity adjustment bar will disappear after approx.
5 seconds without any touch operation.
≥ The setting is cancelled in following cases:
j If you stop playback
j If you turn the unit off
j If you change the mode
≥ Stop the operation when you feel fatigue, discomfort, or otherwise strange while
playing back or adjusting.
).
to adjust setting.
- 113 -