Outbox-Messages Waiting To Be Sent; View Messages On A Sim Card; Messaging Settings; Text Messages - Nokia N91 User Manual

Outbox—messages waiting
to be sent
Outbox is a temporary storage place for messages
waiting to be sent.
Status of the messages in Outbox
Sending—A connection is being made, and the message
is being sent.
Waiting/Queued—The message will be sent when previous
messages of a similar type have been sent.
Resend at (time)—The device will try to send the message
again after a time-out period. Select
sending immediately.
Deferred—You can set documents to be on hold while
they are in Outbox. Scroll to a message that is being sent,
and select Options > Defer
Failed—The maximum number of sending attempts has
been reached. Sending has failed. If you were trying to
send a text message, open the message, and check that
the Sending options are correct.
Example: Messages are placed in the outbox,
for example, when your device is outside network
coverage. You can also schedule e-mail messages
to be sent the next time you connect to your
remote mailbox.
are as follows:
Send to restart the
sending.

View messages on a SIM card

Before you can view SIM messages, you must copy them
to a folder in your device.
1 In the Messag. main view, select
messages.
2 Select Options > Mark/Unmark
to mark messages.
3 Select Options > Copy. A list of folders opens.
4 To start copying, select a folder and OK. To view the
messages, open the folder.

Messaging settings

Fill in all fields marked with
red asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
Some or all message centers, access points or other settings
may be preset for your device by your service provider or
network operator, and you may not be able to change,
create, edit, or remove them.

Text messages

Press , and select Messag.
Text msg. and from the following:
Message centers—View a list of all text message centers
that have been defined.
Options > SIM
> Mark or Mark all
Must be defined or with a
> Options > Settings >
57