How To Use This Guide; How To Put It Together - Bissell ProHeat 2X 8920 SERIES User Manual

How to Use this Guide

This User's Guide has been designed to help you get
the utmost satisfaction from your BISSELL ProHeat 2X.
You'll find assembly and operating instructions, safety
precautions, as well as maintenance and troubleshooting
instructions. Please read this Guide thoroughly before
assembling your Deep Cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all
parts before assembly. Familiarize yourself with the
parts and where they go. Following this User's Guide will
greatly enhance your ability to get the most performance
from your BISSELL ProHeat 2X for many years.
Your ProHeat 2X comes in four easy to
assemble components.
Upper Handle
Lower Base
Tool Caddy (2 pieces)
The only thing you will need to assemble your cleaner is
a Phillips head

How To Put It Together

Refer to Assembly Diagram on page 4
Slide Upper Handle onto Lower Handle. Screw in
1.
with 3 screws.
Place Upper Hose Rack onto back of Upper
2.
Handle, and secure with 1 screw.
Place Lower Hose Rack onto back of Upper
3.
Handle by pushing in and sliding down until it
snaps into place.
Snap tools into the Tool Caddy as shown in
4.
figure 4.
Wrap Power Cord and Flex Hose as shown in
5.
figure 5.
Keep Flex Hose snugly in place by using the
6.
Hose Secure Latch.
ProHeat 2X assembly is now complete.
16 6
screwdriver.
WARNING:
Do Not plug in your cleaner
until you have completely
assembled it per the following
instructions and are famil-
iar with all instructions and
operating procedures.
1
2
4
Crevice Tool
Holder
Scotchgard
Protector Tool
(available on select
models only)
5
Hose Secure
Latch
1a
3
Tough
Stain Brush
TurboBrush
(available on select
models only)
Spraying
Crevice Tool