Do you have a question about the 271245 and is the answer not in the manual?
Questions and answers
Jean Lay
May 17, 2025
monitor screen doesnt change even with new batteries
1 comments:
Mr. Anderson
May 23, 2025
If the CVS monitor screen (part number 271245) doesn't change even with new batteries, the issue could be that the batteries were inserted incorrectly. The device may function erratically or not at all if the battery polarity is wrong. Check and verify the correct polarity of the batteries.
This answer is automatically generated
Robert Roy
March 13, 2025
how do you reconnect the tube to the machine
1 comments:
Mr. Anderson
March 13, 2025
To reconnect the tube to the CVS machine with part number 271245, insert the cuff tube into the opening provided on the left side of the instrument, as shown in the diagram.
This answer is automatically generated
Yvonne Rogers
January 28, 2025
Can the memory function be reset
1 comments:
Mr. Anderson
February 10, 2025
The provided context does not mention a way to reset the memory function of CVS part number 271245. It states that the device automatically stores the last 99 measurements but does not specify whether or how the memory can be cleared.
Page 2
AUTOMATIC INFLATE Blood Pressure Monitor Product #271245 Instruction Manual Instrucciones de Uso Questions? Preguntas? 1-866-464-6184 PLEASE NOTE: THIS MEDICAL INSTRUMENT MUST BE USED ACCORDING TO INSTRUCTIONS TO ENSURE ACCURATE READINGS.
CVS Automatic Blood Pressure Monitor Instruction Manual Table of contents Introduction 1.1. Features of your blood pressure monitor 1.2. Important information about self-measurement Important information on blood pressure and its measurement 2.1. How does high/low blood pressure arise? 2.2. Which values are normal? 2.3.
1. Introduction 1.1. Features of your CVS automatic blood pressure monitor, model #271245 Your blood pressure monitor is a fully automatic, digital blood pressure measuring device for use on the upper arm, which enables very fast and reliable measurement of the systolic and diastolic blood pressure as well as the pulse by way of the oscillometric method.
2. Important information on blood pressure and its measurement 2.1. How does high/low blood pressure arise? Your level of blood pressure is determined in the circulatory center of the brain and adjusts to a variety of situations through feedback from the nervous system. To adjust blood pressure, the strength and frequency of the heart (Pulse), as well as the width of circulatory blood vessels is altered.
Further information • If your values are mostly normal under resting conditions but exceptionally high under conditions of physical or psychological stress, it is possible that you are suffering from so-called “labile hypertension”. Consult your doctor. • Correctly measured diastolic blood pressure values above 120mmHg require immediate medical treatment.
3. Components of your blood pressure monitor The illustration shows the blood pressure monitor consisting of: a) Measuring unit AC/DC Power Socket Time/Date Display ON/OFF START button MEMORY button Cuff connection LCD-display Set TIME/DATE button b) Upper arm cuffs: The cuff is for arm circumference 24–34 cm or 9.5”...
4. Operation of your blood pressure monitor 4.1. Inserting the batteries After you have unpacked your device insert the batteries. The battery compartment is located on the back side of the device (see illustration). a) Remove cover as illustrated b) Insert the batteries (4 x size AA 1,5 V), following the indicated polarity.
4.3. Tube connection Insert the cuff tube into the opening provided on the left side of the instrument, as shown in the diagram. 4.4. Setting the Time and Date To set the time and date press the Set Time/Date button and hold it down for five seconds.
The permissible range is printed on the cuff. If this is not suitable for your use, please contact CVS. Note: Only use clinically approved Microlife or CVS Cuff Model # 271237. • A loose cuff or a sideways protruding air-pocket causes false measurement values.
d) Tighten the cuff by pulling the end and close the cuff by affixing the velcro. Make sure that the cuff Index end falls between the OK lines when the cuff is in position. If it doesn’t, you are using the wrong cuff size.
c) When the device has detected your pulse, the heart symbol in the display begins to blink and a beep tone is audible for every pulse beat. d) When the measurement has been concluded, a long beep tone sounds. The measured systolic and diastolic blood pressure values as well as the pulse are now displayed.
6. Error Messages/Troubleshooting If an error occurs during a measurement, the measurement is discontinued and a corresponding error code is displayed. (Example Error no. 1) Error No. Possible cause(s) ER 1 The systolic pressure was determined but after- wards the cuff pressure fell below 20 mmHg. This situation can occur, for example, if the tube becomes unplugged after the systolic blood pressure has been measured.
Page 14
Other possible errors and their solutions If problems occur when using the device, the following points should be checked: Malfunction Remedy The display remains blank when the instrument is • Check battery installation. switched ON although the batteries are in place. •...
7. Care and maintenance a) Do not expose the device to either extreme temperatures, humidity, dust or direct sunlight. b) The cuff contains a sensitive air-tight bubble. Handle this carefully and avoid all types of straining through twisting or buckling. c) Clean the device with a soft, dry cloth.
8. Warranty Your CVS blood pressure monitor is guaranteed for a lifetime against manufacturers’ defects for the original purchaser only, from date of purchase. The warranty does not apply to damage caused by improper handling, accidents, professional use, not following the operating instructions or alterations made to the instrument by third parties.
10. Technical specifications: Weight: 465 g (with batteries) Size: 131 (W) x 174 (L) x 73 (H) mm Storage temperature: –5 to +50°C Humidity: 15 to 85% relative humidity maximum Operation temperature: 10 to 40°C Display: LCD-Display (Liquid Crystal Display) Measuring method: oscillometric Pressure sensor:...
Page 18
Introducción 1.1. Características del modelo 1.2. Información importante sobre las automediciones Información importante sobre la presión sanguínea y su medición 2.1. ¿Cómo se origina la tensión arterial alta/baja? 2.2. ¿Cuales son los valores normales? 2.3. ¿Qué podemos hacer si se miden regularmente valores altos/bajos? Los diversos componentes del tensiómetro Puesta en funcionamiento del tensiómetro 4.1.
Page 19
1. Introducción 1.1.Características del modelo El modelo es un tensiómetro digital totalmente automático con un método de medición oscilométrico que permite una medición rápida y fiable de la presión arterial sistólica, diastólica y de la frecuencia del latido cardiaco. El modelo dispone de una pantalla de cristal líquido de grandes dimensiones, gracias a la cual es posible visualizar claramente el estado de funcionamiento y la presión del brazalete durante toda la medición.
Page 20
2. Información importante sobre la presión sanguínea y su medición 2.1.¿Cómo se origina la tensión arterial alta/baja? El nivel de la tensión arterial se determina en una zona del cerebro, en el llamado centro circulatorio, y se adapta a cada situación concreta por retroalimentación, a través del sistema nervioso. Para ajustar la tensión arterial se modifican la potencia y la frecuencia cardiacas (pulso), así...
Page 21
Otras informaciones • En presencia de valores mayoritariamente normales en condiciones de reposo, pero excepcionalmente altos en condiciones de esfuerzo físico o psíquico, puede presentarse una «hipertensión lábil». Consulte a su medico si sospecha que puede ser su caso. • Valores de la presión diastólica medidos correctamente superiores a 120 mmHg, requieren un tratamiento médico de inmediato.
Page 22
D) Constitución física • Practicar regularmente alguna actividad deportiva, tras una visita médica preliminar. • Practicar preferentemente una actividad deportiva que requiera más resistencia que fuerza. • Evitar llegar al límite de sus posibilidades físicas. • En caso de padecer patologías o si se han superado los 40 años de edad, antes de iniciar cualquier actividad consulte con el médico para determinar el tipo, la intensidad y forma de practicar deporte.
Page 23
4. Puesta en funcionamiento del tensiómetro 4.1. Colocación de las pilas Una vez desempaquetado el aparato, inserte primero las pilas. El compartimento de la batería está situado en la parte inferior del aparato (vea la ilustración). a) Retire la tapa como se indica en la figura b) Inserte las pilas (4 x tamaño AA 1.5V), teniendo en cuenta la polaridad indicada.
Page 24
4.2. Uso de un adaptador para corriente eléctrica (accesorio especial vendido separadamente) Es posible utilizar el tensiómetro con un adaptador (salida 6VDC/600 mA con conector DIN). El adaptador utilizado deberá reunir las disposiciones legales, (símbolo CE en la etiqueta) y los requerimientos en los E.U.
Page 25
(accesorios) pueden encontrarse en CVS. Atención: Usar solamente brazaletes CVS (modelo # 271237) ó Microlife comprobados clínicamente. • Un brazalete mal ajustado o una cámara de aire asomando por los lados son causas de mediciones falsas.
Page 26
brazalete esté situada en el lado interno del brazo. d) Extender la extremidad libre del brazalete y cerrarlo con el cierre de velcro. Con el brazalete en posición, awegúrese de que el extremo Index (del brazalete) se encuentra entre las líneas OK del brazalete.
Page 27
b) Una vez alcanzada la presión inicial del brazalete, la bomba se para y la presión empezará lentamente a disminuir. Veremos visualizada la presión del brazalete y un valor de control. c) Durante la verificación del latido cardíaco, en el visor empieza a destellar el símbolo del corazón y por cada latido se oirá...
Page 28
6. Mensaje de error/funcionamiento defectuoso En caso de errores se visualizarán los siguientes mensajes: Error no. Posible(s) causa(s) ER 1 Se ha determinado la presión sistólica y después la presión del brazalete ha descendido por deba- jo de 20 mmHg.Tal situación puede ocurrir p.ej. cuando después de haber medido la presión sistólica se ha desconectado el tubo del brazalete.
Page 29
Problemas de mal funcionamiento y su corrección En caso de mal funcionamiento de alguno de los elementos del aparato, compruebe los siguientes puntos y tome las medidas indicadas. Funcionamiento defectuoso Remedio Cuando el aparato se pone en marcha y la pantalla 1.
Page 30
7. Cuidados y mantenimiento a) Evite exponer el tensiómetro a temperaturas extremas, a la humedad, al polvo y a la irradiación de los rayos del sol. b) Quite las manchas del brazalete o la goma con un paño húmedo. No lavar el brazalete. c) Limpiar el aparato con un trapo suave y seco.
Page 31
8. Garantía Su medidor de presión arterial CVS esta garantizado de por vida contra defectos del manufacturero. Esto aplica solamente para el comprador original, y desde la fecha de compra. Esta garantía no aplica a daños causados por el manejo impropio, accidentes, uso profesional, el no seguir las instrucciones de operación, ni alteraciones hechas al instrumento por terceras personas.
Page 32
10. Especificaciones técnicas Peso: 465 gramos con las pilas. Dimensiones: medidas 131 mm ancho.x 174 mm largo x 73 mm alto. Temperatura de Almacenaje: Entre –5˚C y 50˚C. Humedad: 15–85 % máxima humedad relativa. Temperatura de Operación: 10 a 40°C Pantalla: Pantalla LCD de cristal líquido.
Need help?
Do you have a question about the 271245 and is the answer not in the manual?
Questions and answers
monitor screen doesnt change even with new batteries
If the CVS monitor screen (part number 271245) doesn't change even with new batteries, the issue could be that the batteries were inserted incorrectly. The device may function erratically or not at all if the battery polarity is wrong. Check and verify the correct polarity of the batteries.
This answer is automatically generated
how do you reconnect the tube to the machine
To reconnect the tube to the CVS machine with part number 271245, insert the cuff tube into the opening provided on the left side of the instrument, as shown in the diagram.
This answer is automatically generated
Can the memory function be reset
The provided context does not mention a way to reset the memory function of CVS part number 271245. It states that the device automatically stores the last 99 measurements but does not specify whether or how the memory can be cleared.
This answer is automatically generated
Can you reset the memory
How can I clear the memory history?