CVS CVSBPW-610 Quick Start Manual

Automatic Wrist
®
Blood Pressure Monitor
Quick Start Guide
COMPLETE INSTRUCTIONS INCLUDED
Read instructions
carefully before use
For more information call:
1-800-466-3342
IMPORTANT: THIS QUICK START GUIDE
IS NOT A SUBSTITUTE FOR READING
AND UNDERSTANDING THE
INSTRUCTION MANUAL.
1. Install 2 AAA alkaline batteries
according to polarity indications inside
the compartment. Replace battery cover.
2. Set date and time using
the and
as shown to the right.
3. Remove all watches, etc. and apply cuff
to left wrist as shown. See instruction
manual for information regarding use
on right wrist.
CVSBPW - 610
Press Press the button
buttons
blinking HOUR
Press
increasing HOUR
Press
confirm the entry
repeat process to set
MINUTE, MONTH, DAY and YEAR
4. Fasten the hook and loop strap securely
so that there is no extra space between
the cuff and your wrist.
5. Place your elbow on a table so that the
cuff is at the same level as your heart.
Relax your entire body, especially
between your elbow and fingers,
and turn your palm up.
6. Press the START/STOP button ( ) and do not move until
measurement is completed.
7. Your measurement results will be displayed.
Hypertension
indicator
Compares readings to
defined levels established
by the U.S. National
Institutes of Health.
Refer to instruction
manual for explanation.
Prehypertension
Stage 1 Hypertension
Stage 2 Hypertension
Time & date
heart level
Systolic pressure
Diastolic pressure
Heart rate
QS-CVSBPW610