Mazda 6 Owner's Manual page 256

Mazda6_8CJ2-EA-12C_Edition1 Page256
Monday, January 30 2012 10:9 AM
Interior Comfort
Audio System
qOperating the Radio
Channel preset buttons
Seek
tuning
buttons
Auto memory
button
Scan button
Radio ON
Press a band selector button (
turn the radio on.
Band selection
Choose AM by pressing the AM button
( ) and FM by pressing the FM button
( ).
The selected mode will be indicated. If
FM stereo is being received, ST will be
displayed.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
"ST" indicator will go out.
6-32
Form No.8CJ2-EA-12C
Channel preset buttons
Band selector buttons
Tuning
, ) to The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
Seek tuning
Pressing the seek tuning button ( ,
will cause the tuner to seek a higher or
lower frequency automatically.
Manual tuning
dial
)