Black Widow Security BW 852 User Instructions page 3

Full featured keyless entry system with optional starter defeat

Valet Mode: When your system is placed into valet mode, the

optional starter defeat, passive starter defeat, panic feature,

passenger unlock feature, horn output, and flashing parking light

output will be disabled.To put your system into valet mode, turn the

ignition on and hold the override/valet switch for five seconds. The

horn will chirp once (if installed) and the LED will turn on solid to

confirm valet mode.To exit valet mode, repeat the same procedure.

The horn will chirp twice and the LED will turn off to confirm valet

mode exit.

Code Learning Mode: Your system can learn up to three remote

transmitters. To add or replace a transmitter: turn the ignition on,

off, on, off, and on (leave in the on position). The siren will chirp

once (if installed), the LED and parking lights will flash once. Press

and hold the valet/override switch for two seconds. The siren will

chirp three times, the parking lights and LED will flash three times.

Within five seconds press button 1 on each remote transmitter.The

LED and parking lights will flash after each transmitter is learned,

then turn off the ignition. Note: You must have all desired

transmitters during the code learning mode; all previous remotes

will be erased.

LED Status Modes:

Armed = Slow flash

Disarmed = Off

Passive Starter Defeat Engaged = Double flash

Valet Mode Engaged = Solid

852