Mazda RX-8 Owner's Manual page 224

RX-8_8BQ7-EA-10H_Edition1 Page224
Wednesday, July 14 2010 11:51 AM
Interior Comfort
Climate Control System
Windshield defroster switch
Press the switch to defrost the windshield
and front door windows.
qHeating
1. Press the mode selector switch to the
position.
2. Set the temperature control dial to the
hot position.
3. Set the fan control dial to the desired
speed.
4. If dehumidified heating is desired, turn
on the air conditioner.
6-8
Form No.8BQ7-EA-10H
Black plate (224,1)
NOTE
If the windshield fogs up easily, set the
l
mode selector switch to the
If cooler air is desired at face level, set the
l
mode selector switch at the
and adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
l
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
In the or position, the air
l
conditioner is automatically turned on
(however, the indicator light does not
illuminate) and the
automatically selected to defrost the
windshield.
In the or position, the
position cannot be changed to the
position.
qCooling (With Air Conditioner)
1. Press the mode selector switch to the
position.
2. Set the temperature control dial to the
cold position.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing
the A/C switch.
5. Adjust the fan control dial and
temperature control dial to maintain
maximum comfort.
position.
position
position is