Troubleshooting Problems With Your Harmony 525 - Logitech Harmony 525 User Manual

Troubleshooting problems with your Harmony 525

In this section, you'll find some commonly reported issues and the suggested solutions.
These solutions may help you fix problems you're experiencing. If you still cannot fix the problem,
refer to Getting help with your Harmony
24
The TV doesn't turn on when starting an Activity, but using the Help
button on the remote fixes the issue.
• Try increasing the
commands are sent too close together for different devices and need
to be spaced out more.
The TV doesn't go to the right input when starting Activities.
• Using the Harmony Remote Software, check your Activity to ensure
the Activity is set up to use the correct input your TV needs to be set
on to get a picture. Next, check that the inputs are in the correct order
for the Harmony 525 to know how to cycle through each input. If you're
still experiencing trouble, try raising the
for your TV.
When pressing buttons in an Activity, the remote sends
the command twice.
• Try lowering the repeats for the device that is receiving the command.
You can do this by using the troubleshoot option in the Harmony Remote
Software.
When you try to add a new TV to your account, you get a message
informing you that you haven't entered the correct model number.
• The model number for most devices can be found on the front of the
device. If it isn't there, it can be found on a label on the back or bottom
of the device. The model number shouldn't be confused with the serial
number or the model number of the device's remote control, as many
different devices by a manufacturer can share the same remote.
525.
Inter-Device Delay for your television. Sometimes
Inter-Device and Input Delays