Auger Clutch Cable - Adjustment - Honda HS35 Owner's Manual

AUGER CLUTCH CABLE - ADJUSTMENT
The auger clutch cable must be correctly adjusted. Otherwise, the belt will slip and the
snow-throwing mechanism will not operate.
ADJUSTMENT INTERVAL: Every year before operation, or when the auger will not
operate when the auger clutch lever is squeezed firmly.
HOW TO MAKE THE ADJUSTMENT:
1. Turn nut (A) in the-direction shown below. Two or three turns are usually suffi-
cient to eliminate slippage.
2. Then turn nut (B) to tighten the two nuts securely.
3. After adjusting the clutch cable, start the engine and release the auger clutch lever
with auger raised off ground. The auger should remain stationary.
29