Advertisement
Pro 2 KVM Firmware Update Instructions
Step 1
Before proceeding with the Firmware Update you will need to ensure that the Computer
being used for the update process is ready. If you are running Windows 2000 or XP you
will need to install an
The
NTPDA.exe
file Update Utility can be downloaded from the same location as the
Firmware Update files. Once downloaded, the file should be unzipped and the
'Setup.exe' file run in order to install. You will be prompted to reboot your system to
complete the process.
Step 2
Disconnect any Computers from the KVM then power it on. Set the Dip Switches
according to the Firmware about to be used. The Pro 2 KVM has four flash Dip
Switches. Listed below are the appropriate dipswitch settings for each Firmware type.
MAIN |
For firmware specifically
designed to resolve On-
Screen Display Issues.
MOUSE | #1
For firmware specifically
designed
Mouse related Issues.
16-Port Pro 2 KVMs have two sets of Mouse and Keyboard Firmware and each needs to
be flashed separately. The same Firmware is flashed twice in effect.
MOUSE | #2
For firmware specifically
designed
Mouse related Issues.
F1DA116T Only
TSG-UK-2-001
TSG-UK-1-001
Self Help Guide
Self Help Guide
®
®
NT Direct Port Access Update
to
resolve
to
resolve
|
|
www.belkin.com
www.belkin.com
prior to running the Flash Update.
OSD |
For firmware specifically
designed to resolve On-
Screen Display Issues.
KEYBOARD | #1
For firmware specifically
designed
Keyboard related Issues.
KEYBOARD | #2
For firmware specifically
designed
Keyboard related Issues.
F1DA116T Only
|
|
to
resolve
to
resolve
Page 2 of 4
Page 1 of 1
Advertisement
