Certification Information (Sar); The Nokia 9300 Device Meets Guidelines For Exposure To Radio Waves - Nokia 9300 User Manual

Hide thumbs Also See for 9300:
Table of Contents

Advertisement

A d d i t i o n a l s a f e t y i n f o r m a t i o n
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the device.
2. Press
as many times as needed to clear the display and ready the device for calls.
3. Key in the official emergency number for your present location. Emergency numbers vary by location.
4. Press the
key.
If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this
guide or your service provider for more information. When making an emergency call, give all the necessary information as
accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end
the call until given permission to do so.

CERTIFICATION INFORMATION (SAR)

THE NOKIA 9300 DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.

Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure
to radio frequency (RF) energy recommended by international guidelines (ICNIRP). These limits establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The standards and guidelines include a substantial
safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in
measurements.
The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The
SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue. Tests for SAR
are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested
frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is
designed to use only the power required to reach the network. That amount changes depending on a number of factors such
as how close you are to a network base station. The highest SAR value when tested according to international testing procedures
for use at the ear for device type RAE-6 is 0.24 W/kg and for device type RA-4 is 0.30 W/kg. Your phone's device type is listed on
the label located under the battery.
SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories
and enhancements may result in different SAR values. Additional SAR information may be provided under product information
at www.nokia.com.
USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over one gram of tissue. Device types RAE-6
and RA-4 have also been tested against this SAR limit. The highest SAR value reported under this standard during product
certification for use at the ear is 0.21 W/kg for device type RAE-6 and 0.44 W/kg for device type RA-4 and when properly worn
on the body is 0.52 W/kg for device type RAE-6 and 1.15 W/kg for device type RA-4. Information about these devices can be
found on the FCC's website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID
PYARAE-6 for device type RAE-6 or FCC ID PYARA-4 for device type RA-4.
Copyright © 2005 Nokia. All Rights Reserved.
105

Advertisement

Table of Contents
loading

Table of Contents