Add Ringing Tones For Contacts; Create Contact Groups; Remove Members From A Group - Nokia N70 User Manual

To restrict calls from your device to selected phone
numbers, select Options
new numbers to the fixed dialling list, select
New SIM contact. You need the PIN2 code for these
functions.
When you use Fixed
not possible, except when sending text messages over a
packet data connection. In this case, the message centre
number and the recipient's phone number must be
included on the fixed dialling list.
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.

Add ringing tones for contacts

When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller's telephone
number is sent with the call and your device recognises it).
1
Press to open a contact card, or go to the groups
list, and select a contact group.
2
Select Options
opens.
3 Select the ringing tone you wish to use for the
individual contact or the selected group.
32 Copyright © 2006 Nokia. All rights reserved.
> Activ. fixed dialling. To add
Options
dialling, packet data connections are
> Ringing tone. A list of ringing tones
To remove the ringing tone, select
list of ringing tones.
>

Create contact groups

1
In Contacts, press
2
Select Options >
3 Write a name for the group or use the default name
Group %N, and select OK.
4
Open the group, and select
5
Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
To rename a group, select
new name, and select OK.

Remove members from a group

1 In the groups list, open the group you want to modify.
2
Scroll to the contact, and select
from group.
3
Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select
groups.
Default tone
to open the groups list.
New group.
Options > Add members.
to mark it. To add
Options > Rename, enter the
Options > Remove
Options > Belongs to
from the