Receive Mms And E-Mail Settings - Nokia N70 User Manual

message. In the navigation bar, you can see the message
length indicator counting backwards. For example, 10 (2)
means that you can still add 10 characters for the text to
be sent as two messages.
Note: E-mail messages are automatically placed in
Outbox before sending. If sending does not succeed,
the e-mail is left in the
Tip! In Messaging
and send them in a multimedia message. In the
multimedia message editor view, select
Create presentation
mode is set to
messages', p. 60.
Tip! When you send a multimedia message to an
e-mail address or a device that supports the receiving
of large images, use the larger image size. If you are
not sure of the receiving device, or the network does
not support sending large files, it is recommended that
you use a smaller image size or a sound clip that is no
longer than 15 seconds. To change the setting, select
Options > Settings
size in the Messaging
54 Copyright © 2006 Nokia. All rights reserved.
Outbox with the Failed
you can also create presentations
Options
(shown only if MMS creation
Guided or Free). See 'Multimedia
> Multimedia message
main view.

Receive MMS and e-mail settings

You may receive the settings in a text message from your
network operator or service provider. See 'Data and
settings', p. 55.
For availability of and subscription to data services,
contact your network operator or service provider. Follow
status.
the instructions given by your service provider.
Enter the MMS settings manually:
1
Select Tools
>
and define the settings for a multimedia messaging
access point. See 'Connection settings', p. 95.
2 Select Messaging
message >
you created to be used as the preferred connection. See
also 'Multimedia messages', p. 60.
Before you can send, receive, retrieve, reply to, and forward
e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly. See
'Connection settings', p. 95.
> Image • Define your e-mail settings correctly. See 'E-mail', p.
61. You need to have a separate e-mail account. Follow
the instructions given by your remote mailbox and
Internet service provider (ISP).
> Settings > Connection >
> Options > Settings
Access point in use and the access point
Access points,
> Multimedia