Creating And Editing A Template; Creating A Template - Nero 9 Manual

13

Creating And Editing a Template

13.1 Creating a Template

With Nero CoverDesigner, you can create your own templates.
To do this, proceed as follows:
1.
Click the

The New Document window is opened.
2.
Select the document type and an empty or predesigned template.
3.
Select the Create New Template check box.
4.
Click the OK button.

The New Document window is closed and the predefined cover elements for the se-
lected document type are displayed in the drawing area.
5.
Design the document as desired.
6.
To save the template as a compressed file, select File > Quick Save from the menu.
To save the template without compression, select File > Save from the menu.

If you attempt to save a template with pictures that total more than 5 MB without com-
pression, a window is opened asking whether you want to save the file with or without
compression.
The Save As window is then opened.
7.
If the My Documents folder is displayed, select the Nero CoverDesigner Templates folder
from the Save In drop-down menu.
8.
Enter a file name and click the Save button.
Document data is not saved when the document is saved as a template.
icon on the toolbar.
If you selected the Custom document type, you can add new cover elements
by selecting Edit > Insert New Page from the menu.
Saving the template in compressed form may be a good idea if it contains a lar-
ge number of pictures. The size of the template file will be smaller. Compres-
sion can reduce the picture quality in some cases, however.
Even if you did not select the Create New Template check box at the begin-
ning, you can still create a template. In this case, simply select Save as Tem-
plate from the File menu. Make certain that you save the template file in the
Nero CoverDesigner Templates folder so that it appears in the template list.
Nero CoverDesigner
Creating And Editing a Template
52