Align Elements Window - Nero 9 Manual

11

Align Elements Window

The Align Elements window aligns objects relative to the page, i.e., the editable drawing
area, or another object. You can open the window by clicking the Object > Align menu.
This window contains the following check boxes and option buttons:
Check box
Horizontal alignment
Check box
Vertical alignment
Option button
Last Selected Element
Option button
Page
This feature is not available for bent objects.
Specifies the horizontal alignment. There are three op-
tion buttons:
Left: Aligns the object along the left edge.
Center: Centers the object.
Right: Aligns the object along the right edge.
Specifies the vertical alignment. There are three option
buttons:
Top: Aligns the object along the top edge.
Center: Centers the object.
Bottom: Aligns the object along the bottom edge.
Aligns the object with another. In order to use this fea-
ture, two objects must be selected; the object that was
selected last will be aligned in relation to the first.
This feature is useful for positioning two objects on top
of one another, e.g., text on a picture.
Aligns the object to the page, i.e., to the editable area.
Nero CoverDesigner
Align Elements Window
Align Elements window
50