Table of Contents
Advertisement
Check box
Simulation
Check box
Write
Check box
Remove silence at end
of *.cda tracks
Check box
Create for US TV stan-
dard
Check box
Video Files
11.4 Burning with Nero Image Recorder – Creating an image file
To set the burn settings according to your requirements and to save your project as an im-
age file to the hard drive using Nero Image Recorder, proceed as follows:
1.
Compile a project of your choice.
The Final Burn Settings screen opens.
2.
Select the Image Recorder option from the Current Recorder drop-down menu.
3.
Add to the required values in the input fields.
4.
Add to the required settings in the extended area as necessary.
5.
Click the Burn button.
The Burning Process screen appears and the Save Image
Performs all steps in the burn process without using the laser
beam. We recommend running a simulation if you are de-
compressing data before burning, e.g. when burning an
Audio CD from MP3 files. You can assume that if simulation
is successful, the burn process will also be successful.
Not available when saving with Nero Image Recorder.
Starts the actual physical burn process (e.g. after a simula-
tion).
This box is checked by default.
Removes silence from the end of an audio file. This check
box is selected by default. Audio data is stored in blocks even
if you do not always finish at the end of a block limit. The last
block is filled with silence when needed.
Available for Audio CDs only.
Generates a CD compatible with most US DVD players.
Available for Video CDs and Super Video CDs only.
If the check box is selected, Nero Express looks for FourCC
codes in AVI files during the burn process and replaces them.
The original files are not modified. The compatibility of
MPEG-4 video files ("DIVX") with MPEG-4 compliant DVD
players can be increased.
Only available if your project includes videos in AVI format.
Nero Image Recorder must be activated before it appears in the drop-down
menu.
Nero Express
Burn Compilation
File dialog box opens.
52
Advertisement
Table of Contents
