Assigning A Paper Stock - Nero 9 Manual

6.3

Assigning a Paper Stock

You can assign a paper stock to every cover element. The dimensions of the cover element
may change when you do so. Assigning a paper stock usually means that you want to print
on special stock, from a particular manufacturer, for example.
To assign a paper stock to a cover element, proceed as follows:
1.
Click the tab that contains the desired cover element.

The cover element is displayed.
2.
Click the drop-down menu in the View toolbar.

The drop-down menu is opened.
3.
Select a paper stock.

The drop-down menu is closed and the selected paper stock is assigned to the cover
element. The size, dimensions, and/or position of the cover element may change.
Changing the Size of Cover Elements
If you change the size of a cover element, objects may end up outside the
drawing area: Objects are positioned absolutely in relation to the ruler, i.e., the
page dimensions, and not relative to the cover element itself.
Nero CoverDesigner
Editing a Document
24